English
Wholesale Dealers of Anaerobic Mbr - MBR Membrane Module Reinforced PVDF BM-SLMBR-30 Replacing Project – Bangmo Featured Image
  • Wholesale Dealers of Anaerobic Mbr - MBR Membrane Module Reinforced PVDF BM-SLMBR-30 Replacing Project – Bangmo

Wholesale Dealers of Anaerobic Mbr - MBR Membrane Module Reinforced PVDF BM-SLMBR-30 Replacing Project – Bangmo

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

The really abundant projects administration experiences and just one to one particular provider model make the substantial importance of organization communication and our easy understanding of your expectations for Membrane Separation Technique , Wastewater Bioreactor , Ultrafiltration Water Filter , We warmly welcome customers from all over the world for any kind of cooperation with us to build a mutual benefit future. We are devoting ourselves wholeheartedly to offer customers whole heartedly service.
Wholesale Dealers of Anaerobic Mbr - MBR Membrane Module Reinforced PVDF BM-SLMBR-30 Replacing Project – Bangmo Detail:

Product Overview

MBR is a combination of membrane technology and bio-chemical reaction in water treatment. MBR filter the sewage in bio-chemical tank with membrane so that sludge and water are separated. On one hand, membrane rejects microorganisms in the tank, which greatly increase the concentration of activated sludge to a high level, thus the bio-chemical reaction of sewage degradation processes more rapidly and thoroughly. On the other hand, water output is clear and of high quality because of high precision of membrane.
This product adopts reinforced modified PVDF material, which will not peel or break when backwashing, meanwhile has good permeable rate, mechanical performance, chemical resistance and pollution resistance. ID & OD of reinforced hollow fiber membrane are 1.0mm and 2.2mm respectively, filtration precision is 0.1 micron. Filtration mode is outside-in, that is raw water, driven by differential pressure, permeates into the hollow fibers, while bacteria, colloids, suspended solids and microorganisms etc. are rejected in the membrane tank.

Applications

Treatment, recycle and reuse of industrial waste water.
Treatment of refuse leachate.
Upgrade and reuse of municipal sewage.

Filtration Performance

Below filtration effects are proved according to the use of modified PVDF hollow fiber ultra filtration membrane in different types of water:

No. Item Output Index
1 TSS ≤1mg/L
2 Turbidity ≤1
3 CODcr Removal rate depends on the bio-chemicalperformance & designed sludge concentration(Instant removal rate of membrane is ≤30% without

bio-chemical function)
4 NH3-H

Specifications

product-description1

Technical Parameters

Structure Outside-in
Membrane Material Reinforced Modified PVDF
Pore Size 0.1 micron
Membrane Area 30m2
Membrane ID/OD 1.0mm/2.2mm
Size 1250mm×2000mm×30mm
Joint Size Φ24.5mm

Application Parameters

Designed Flux 10~25L/m2.h
Backwashing Flux Twice the designed flux
Operating Temperature 5~45°C
Maximum Operating Pressure -50KPa
Suggested Operating Pressure ≤-35KPa
Maximum backwashing Pressure 100KPa
Operating Mode 8/9min on+2/1min pause
Aeration Mode Continuous Aeration
Aeration Rate 4m3/h.piece
Washing Period Clean water backwashing every 2~4h; CEB every 2~4 weeks;CIP every 6~12 months.           *Abovefrequenciesareforreferenceonly,pleaseadjustaccordingtoactualchangeof differentialpressure.

Using Conditions

Appropriate pretreatments must be taken when raw water contains a lot of impurities and coarse particles, or oil and grease account for a large proportion in the water. Defoamer should be added when necessary to remove foam in membrane tank, please use alcohol defoamer which is not   easy to foul.

Item Value Remark
PH Operate: 5-9Wash: 2-12 Neutral PH is good for bacteria culture
Particle Diameter <2mm Sharp particles will scratch membrane
Oil & Grease ≤2mg/L High content will affect membrane flux
Hardness ≤150mg/L High content will cause fouling

Component Material

Component Material
Hollow Fiber Membrane Reinforced Modified PVDF
Sealing Compound Epoxy Resins + Polyurethane (PU)
Housing ABS
Product detail pictures:

Wholesale Dealers of Anaerobic Mbr - MBR Membrane Module Reinforced PVDF BM-SLMBR-30 Replacing Project – Bangmo detail pictures

Related Product Guide:
The customer satisfaction is our primary target. We uphold a consistent level of professionalism, quality, credibility and service for Wholesale Dealers of Anaerobic Mbr - MBR Membrane Module Reinforced PVDF BM-SLMBR-30 Replacing Project – Bangmo , The product will supply to all over the world, such as: Seychelles, Zimbabwe, Bangkok, We have been fully aware of our customer's needs. We deliver high quality products, competitive prices and the first class service. We would like to establish good business relationships as well as friendship with you in the near future.
    • The company's products very well, we have purchased and cooperated many times, fair price and assured quality, in short, this is a trustworthy company!
    5 Stars By Grace from Juventus - 2017.12.09 14:01
    The customer service staff's answer is very meticulous, important is that the product quality is very good, and packaged carefully, shipped quickly!
    5 Stars By Dee Lopez from Japan - 2018.11.11 19:52
    Write your message here and send it to us

    Products categories

    Hit enter to search or ESC to close