Factory source Membrane Water - UF Membrane Module PVC Ultrafiltration Membrane Module UFc50C Stainless Steel Housing Household Water Purification – Bangmo

Product Overview

UFc50C  is  capillary  hollow  fiber  membrane  made  of  high  polymer  material, which is a separating product that will not have any phase change. The modified PVC material adopted to this product has good permeable rate, good mechanical strength, good  chemical  resistance  anti-pollution  ability,  MWCO  is  100k  Dalton.  Membrane ID/OD  is  1.0mm/1.8mm,  filtering  direction  is  inside-out,  that  is  raw  water  flows inside the hollow fibers and, driven by differential pressure, permeates outwards so as to filter  bacteria, colloids, suspended substances,  microbes, and other  harmful substances.

Applications

Production of mineral water, mountain spring water and other germ-free liquid;

Drinking treatment of tap water, surface water, well water and river water;

Pre-treatment of RO device;

Treatment, recycle and reuse of industrial wastewater

Filtration Performance

According to the service conditions of modified PVC hollow fiber ultrafiltration membrane which  are  applied to various water  sources, the  product  is  proved to reach below filtration effects:

Above data is obtained when turbidity of feed water is less than 15NTU. The product  is  proved  to  reach  the  sanitary  standards  of  drinking  water  by  Health Department  of  Guangdong  Province.  Approval  number  is  YUE  WEI  SHUI  ZI  2014S1671.

Product Parameters

Product Appearance

Figure 1 Product Dimensions

Inner Filter

Figure 2 Inner Filter Dimensions

Technical Parameters:

Application Data:

Feed Water Requirements:

A security filter, precision <50 micron, should be set as pretreatment of UF, in case of  blockage caused  by  large  particles  in  raw water. Attention:  UF  membrane material is macromolecular organic plastics, raw water must not contain any organic solvents.

Component Material: