English
Factory source Membrane Water - UF Membrane Module 8 inch PVC Ultrafiltration Membrane Module UFc200AM Drinking Water Treatment – Bangmo Featured Image
  • Factory source Membrane Water - UF Membrane Module 8 inch PVC Ultrafiltration Membrane Module UFc200AM Drinking Water Treatment – Bangmo
  • Factory source Membrane Water - UF Membrane Module 8 inch PVC Ultrafiltration Membrane Module UFc200AM Drinking Water Treatment – Bangmo

Factory source Membrane Water - UF Membrane Module 8 inch PVC Ultrafiltration Membrane Module UFc200AM Drinking Water Treatment – Bangmo

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

go on to boost, to be certain item quality in line with market and buyer standard demands. Our firm has a excellent assurance procedure happen to be established for Hollow Fiber Module , Water Purifiers Filters , Uf Ultrafiltration , As an expert specialized in this field, we are committed to solving any problem of high temperature protection for users.
Factory source Membrane Water - UF Membrane Module 8 inch PVC Ultrafiltration Membrane Module UFc200AM Drinking Water Treatment – Bangmo Detail:

Product Overview

UFc200AM capillary hollow fiber membrane is high polymer material, which will not have any phase change. Modified PVC material, which is adopted on this product, has good permeable rate, good mechanical properties, good chemical resistance and pollution resistance. MWCO is 100K Dalton, membrane ID/OD is 1.0mm/1.8mm, filtering type is inside-out.

Applications

  • Production of mineral water, mountain spring water and other sterile liquid.
  • Drinking treatment of tap water, surface water, well water, river water, etc.
  • Pretreatment of RO.
  • Treatment, recycle and reuse of industrial waste water.

Filtration Performance

This product is proven to have below filtering effects according to the service conditions of different water sources:

Ingredient Effect
SS, Particles > 1μm Removal Rate ≥ 99%
SDI ≤ 3
Bacteria, Viruses > 4 log
Turbidity < 0.1NTU
TOC Removal Rate: 0-25%

*Above data is obtained under the condition that feeding water turbidity is < 15NTU.

Product Parameters

product-description15

Technical Parameters:

Filtering Type Inside-out
Membrane Material Modified PVC
MWCO 100K Dalton
Membrane Area 27m2
Membrane ID/OD 1.0mm/1.8mm
Dimensions Φ200mm*1480mm
Connector Size DN40 Union

Application Data:

Pure Water Flux 7,000L/H (0.15MPa, 25C)
Designed Flux 35-100L/m2.hr (0.15MPa, 25C)
Suggested Working Pressure ≤ 0.2MPa
Maximum Transmembrane Pressure 0.2MPa
Maximum Working Temperature 45C
PH Range Working: 4-10; Washing: 2-12
Operating Mode Cross-flow or Dead-end

Feeding Water Requirements:
Before feeding water, a security filter < 50 μm should be set to prevent blockage caused by large particles in raw water.

Turbidity ≤ 15NTU
Oil & Grease ≤ 2mg/L
SS ≤ 20mg/L
Total Iron ≤ 1mg/L
Continuous Residual Chlorine ≤ 5ppm
COD Suggested ≤ 500mg/L

*Material of UF membrane is polymer organic plastic, there must not be any organic solvents in raw water.

Operating Parameters:

Maximum Backwashing Pressure 0.2MPa
Backwashing Flow Rate 100-150L/m2.hr
Backwashing Frequency Every 30-60min.
Backwashing Duration 30-60s
CEB Frequency 0-4 times per day
CEB Duration 5-10min.
CIP Frequency Every 1-3 months
Washing Chemicals:
Sterilization 15ppm Sodium Hypochlorite
Organic Pollution Washing 0.2% Sodium Hypochlorite + 0.1% Sodium Hydroxide
Inorganic Pollution Washing 1-2% Citric Acid/0.2% Hydrochloric Acid

Component Material:

Component Material
Membrane Modified PVC
Sealing Epoxy Resins
Housing UPVC
Product detail pictures:

Factory source Membrane Water - UF Membrane Module 8 inch PVC Ultrafiltration Membrane Module UFc200AM Drinking Water Treatment – Bangmo detail pictures

Factory source Membrane Water - UF Membrane Module 8 inch PVC Ultrafiltration Membrane Module UFc200AM Drinking Water Treatment – Bangmo detail pictures

Related Product Guide:
Our goal is to provide high quality products at competitive prices, and whole heartedly service to customers around the world. We are ISO9001, CE, and GS certified and strictly adhere to their quality specifications for Factory source Membrane Water - UF Membrane Module 8 inch PVC Ultrafiltration Membrane Module UFc200AM Drinking Water Treatment – Bangmo , The product will supply to all over the world, such as: Montpellier, Austria, Iraq, The design, processing, purchasing, inspection, storage, assembling process are all in scientific and effective documentary process , increasing usage level and reliability of our brand deeply, which makes us become superior supplier of the four major product categories shell castings domestically and obtained the customer's trust well.
    • The company has a good reputation in this industry, and finally it tured out that choose them is a good choice.
    5 Stars By Beulah from Washington - 2017.04.28 15:45
    The company's products very well, we have purchased and cooperated many times, fair price and assured quality, in short, this is a trustworthy company!
    5 Stars By Barbara from Sri Lanka - 2018.06.21 17:11
    Write your message here and send it to us

    Products categories

    Hit enter to search or ESC to close