Factory made hot-sale Membrane Microfilter - UF Membrane Module PVC Ultrafiltration Membrane Module UFc4040 RO housing – Bangmo

Short Description:

Product Detail

Product Tags

Feedback (2)

All we do is usually affiliated with our tenet Buyer to start with, Belief to start with, devoting about the food packaging and environmental defense for Mbr Wastewater Treatment Plant , Water Systems , Membrane Toray , Welcome all nice buyers communicate details of solutions and ideas with us!!

Factory made hot-sale Membrane Microfilter - UF Membrane Module PVC Ultrafiltration Membrane Module UFc4040 RO housing – Bangmo Detail:

Applications

Production of mineral water, spring water, or other sterile liquid.
Drinking treatment of tap water, surface water, well water and river water.
Pretreatment of RO.
Treatment, recycle and reuse of industrial waste water.

Filtration Performance

This product is proven to have below filtering effects according to the service conditions of different water sources:

Ingredient	Effect
SS, Particles > 1μm	Removal Rate ≥ 99%
SDI	≤ 3
Bacteria, Viruses	> 4 log
Turbidity	<0. 1NTU
TOC	Removal Rate: 0-25%

*Above data is obtained under the condition that feeding water turbidity is < 15NTU. This product is qualified for drinking water related products.

Product Parameters

product-description1

Technical Parameters

Filtering Type	Inside-out
Membrane Material	Modified PVC
MWCO	100K Dalton
Membrane Area	3.8m2
Membrane ID/OD	1.0mm/1.8mm
Dimensions	Φ90mm*1016mm
Connector Size	Φ19mm

Application Data

Pure Water Flux	1,200L/H (0.15MPa, 25C)
Designed Flux	35-100L/m2.hr (0.15MPa, 25C)
Suggested Working Pressure	≤ 0.2MPa
Maximum Transmembrane Pressure	0.2MPa
Maximum Working Temperature	45C
PH Range	Working: 4-10; Washing: 2-12
Operating Mode	Cross-flow or Dead-end

Feeding Water Requirements

Before feeding water, a security filter < 50 μm should be set to prevent blockage caused by large particles in raw water.

Turbidity	≤ 15NTU
Oil & Grease	≤ 2mg/L
SS	≤ 20mg/L
Total Iron	≤ 1mg/L
Continuous Residual Chlorine	≤ 5ppm
COD	Suggested ≤ 500mg/L

*Material of UF membrane is polymer organic plastic, there must not be any organic solvents in raw water.

Operating Parameters

Maximum Backwashing Pressure	0.2MPa
Backwashing Flow Rate	100-150L/m2.hr
Backwashing Frequency	Every 30-60min.
Backwashing Duration	30-60s
CEB Frequency	0-4 times per day
CEB Duration	5-10min.
CIP Frequency	Every 1-3 months
Washing Chemicals:
Sterilization	15ppm Sodium Hypochlorite
Organic Pollution Washing	0.2% Sodium Hypochlorite + 0.1% Sodium Hydroxide
Inorganic Pollution Washing	1-2% Citric Acid/0.2% Hydrochloric Acid

Component Material

Component	Material
Membrane	Modified PVC
Sealing	Epoxy Resins
Housing	UPVC

Product detail pictures:

Related Product Guide:

continue to enhance, to be certain solution high quality in line with market and buyer standard requirements. Our corporation has a excellent assurance program are actually established for Factory made hot-sale Membrane Microfilter - UF Membrane Module PVC Ultrafiltration Membrane Module UFc4040 RO housing – Bangmo , The product will supply to all over the world, such as: Bhutan, Spain, Zurich, Based on products with high quality, competitive price, and our full range service, we have accumulated professional strength and experience, and we have built up a very good reputation in the field. Along with the continuous development, we commit ourselves not only to the Chinese domestic business but also the international market. May you moved by our high quality products and passionate service. Let's open a new chapter of mutual benefit and double win.

Cross Flow System