Our enterprise since its inception, often regards solution excellent as enterprise life, continually strengthen output technology, enhance product high quality and continually strengthen organization total high-quality administration, in strict accordance using the national standard ISO 9001:2000 for Ultrafiltration Water Purifier , Mbr Bioreactor , Membrane Filtering , We have been in operation for more than 10 years. We are dedicated to quality products and consumer support. We invite you to visit our company for a personalized tour and advanced business guidance.
Cheapest Factory Cross Flow Membrane - MCR Membrane Module Reinforced PVDF BM-SLMCR-30 Replacing Project – Bangmo Detail:
Applications
● Purification of surface water.
● Reuse of heavy metal waste water.
● Pretreatment of RO.
Filtration Performance
Below filtration effects are proved according to the use of modified PVDF hollow fiber ultrafiltration membrane in different types of water:
No. |
Item |
Water Output Index |
1 |
TSS |
≤1mg/L |
2 |
Turbidity |
≤ 1 |
Specifications
Size
Chart 1 MBR Size
Technical Parameters
Filtering Direction |
Outside-in |
Membrane Material |
Reinforced Modified PVDF |
Precision |
0.03 micron |
Membrane Area |
30m2 |
Membrane ID/OD |
1.0mm/ 2.2mm |
Size |
1250mm×2000mm×30mm |
Joint Size |
Φ24.5mm |
Component Material
Component |
Material |
Hollow Fiber Membrane |
Reinforced Modified PVDF |
Sealing Compound |
Epoxy Resins + Polyurethane (PU) |
Housing |
ABS |
Using Conditions
Proper pretreatments must be set when raw water contains a lot of impurities/coarse particles or large proportion of grease. Defoamer must be used to remove foams in membrane tank when necessary, please use alcoholic defoamer which is not easy to scale.
Item |
Limit |
Remark |
PH Range |
5-9 (2- 12 when washing) |
Neutral PH is better for bacterial culture |
Particle Diameter |
<2mm |
Prevent sharp particles to scratch membrane |
Oil & Grease |
≤2mg/L |
Prevent membrane fouling/sharp flux decrease |
Hardness |
≤150mg/L |
Prevent membrane scaling |
Application Parameters
Designed Flux |
15~40L/m2.h |
Backwashing Flux |
Twice the designed flux |
Operating Temperature |
5~45°C |
Maximum Operating Pressure |
-50KPa |
Suggested Operating Pressure |
≤-35KPa |
Maximum backwashing Pressure |
100KPa |
Operating Mode |
Continuous opeartion, intermittent backwashing air flushing |
Blowing Mode |
Continuous Aeration |
Aeration Rate |
4m3/h.piece |
Washing Period |
Clean water backwashing every 1~2h; CEB every 1~2 days;Offline washing every 6~12 months
(Above information is for reference only, please adjust
according to actual differential pressure change rule) |
Product detail pictures:
Related Product Guide:
Being supported by an highly developed and skilled IT group, we could offer you technical support on pre-sales & after-sales support for Cheapest Factory Cross Flow Membrane - MCR Membrane Module Reinforced PVDF BM-SLMCR-30 Replacing Project – Bangmo , The product will supply to all over the world, such as: Niger, Accra, Auckland, Our expert engineering team will generally be prepared to serve you for consultation and feedback. We are able to also offer you with free of charge samples to meet your requirements. efforts will likely be produced to provide you whole heartedly service and merchandise. When you are keen on our business and products, please speak to us by sending us emails or call us quickly. In an effort to know our products and company extra, you may come to our factory to view it. We will generally welcome guests from all over the world to our business to create business relations with us. Please feel cost-free to speak to us for small business and we believe we'll share the trading experience with all our merchants.