Best-Selling Mbr Process - UF Membrane Module PVC Ultrafiltration Membrane Module UFc80C Stainless Steel Housing Rain Water Treatment – Bangmo

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

With our leading technology at the same time as our spirit of innovation,mutual cooperation, benefits and growth, we're going to build a prosperous future together with your esteemed firm for Water Purification Membranes , Uf Water Filter , Water Purifier Membrane , Our customers mainly distributed in the North America, Africa and Eastern Europe. we will source high quality goods using the really aggressive selling price.
Best-Selling Mbr Process - UF Membrane Module PVC Ultrafiltration Membrane Module UFc80C Stainless Steel Housing Rain Water Treatment – Bangmo Detail:

Applications

●Production of mineral water, mountain spring water and other germ-free liquid.
●Drinking treatment of tap water, surface water, well water and river water.
●Pre-treatment of RO device.
●Treatment, recycle and reuse of industrial wastewater.

Filtration Performance

According to the service conditions of modified PVC hollow fiber ultrafiltration membrane which  are  applied to various water  sources, the  product  is  proved to reach below filtration effects:

Water Composition Filtering Effect
Suspended Substances, Particles >1um Removal Rate ≥99%
SDI ≤ 3
Virus, Bacteria >4 log
Turbidity <0.1NTU
TOC Removal Rate 0-25%

Above data is obtained when turbidity of feed water is less than 15NTU. The product is proved to reach the sanitary standards of drinking water by Health Department of Guangdong Province. Approval number is YUE WEI SHUI ZI 2014 S1671.

Product Parameters

Product Appearance

product-description1

Figure 1 Product Dimensions

Technical Parameters

Structure Inside-out
Membrane Material Modified PVC
MWCO 100K Dalton
Nominal Membrane Area 16.5m2
Membrane ID/OD 1.0mm/1.8mm
Module Dimensions Φ180mm×1382mm
Connector Dimensions DN25 Female Thread

Application Data

Pure Water Flux 7,000L/H (0.15MPa, 25ºC)
Designed Flux 35-100L/H (0.15MPa, 25ºC)
Operating Pressure ≤0.2MPa
Maximum Trans Membrane Pressure 0.2MPa
Maximum Operating Temperature 45ºC
Operating PH Range 4-10
Washing PH Range 2-12
Operating Mode Cross-flow/Dead-end Filtration

Feed Water Requirements

A security filter, precision <50 micron, should be set as pretreatment of UF, in case of  blockage caused by large particles  in  raw water. Attention: UF membrane material is macromolecular organic plastics, raw water must not contain any organic solvents.

Feed Water Turbidity ≤15NTU
Oil & Grease ≤2mg/L
Feed Water SS ≤20mg/L
Total Iron ≤1mg/L
Continuous Feeding Residual Chlorine ≤5ppm
COD Suggested ≤500mg/L

Component Material

Component Material
Hollow Fiber Membrane Modified PVC
Potting Material Epoxy Resins
Membrane Housing SUS304

Typical Operating Parameters

Maximum Backwashing Pressure 0.2MPa
Backwashing Flow Rate 100-150L/m2 .h
Backwashing Frequency Every 30-60 minutes
Backwashing Duration 30-60 seconds
CEB Frequency 0-4 times/day
CEB Duration 5-10 minutes
CIP Frequency 1-3 months
General Washing Chemicals :
Disinfection 15ppm NaClO
Organic Contamination Washing 0.2% NaClo+0.1% NaOH
Inorganic Contamination Washing 1-2% Citric Acid /0.2% HCl

Product detail pictures:

Best-Selling Mbr Process - UF Membrane Module PVC Ultrafiltration Membrane Module UFc80C Stainless Steel Housing Rain Water Treatment – Bangmo detail pictures

Best-Selling Mbr Process - UF Membrane Module PVC Ultrafiltration Membrane Module UFc80C Stainless Steel Housing Rain Water Treatment – Bangmo detail pictures


Related Product Guide:

Our mission is usually to turn into an innovative provider of high-tech digital and communication devices by providing worth added design and style, professional producing, and repair capabilities for Best-Selling Mbr Process - UF Membrane Module PVC Ultrafiltration Membrane Module UFc80C Stainless Steel Housing Rain Water Treatment – Bangmo , The product will supply to all over the world, such as: Boston, Kazakhstan, Morocco, We supply professional service, prompt reply, timely delivery, excellent quality and lower price to our customers. Satisfaction and good credit to every customer is our priority. We focus on every detail of order processing for customers till they have received safe and sound products with good logistics service and economical cost. Depending on this, our products are sold very well in the countries in Africa, the Mid-East and Southeast Asia. Adhering to the business philosophy of ‘customer first, forge ahead', we sincerely welcome clients from at home and abroad to cooperate with us.
  • Products and services are very good, our leader is very satisfied with this procurement, it is better than we expected,
    5 Stars By May from Sacramento - 2018.09.23 17:37
    The customer service staff is very patient and has a positive and progressive attitude to our interest, so that we can have a comprehensive understanding of the product and finally we reached an agreement, thanks!
    5 Stars By Janet from Belgium - 2018.06.26 19:27
    Write your message here and send it to us