Leave Your Message
News Categories

TMP Rise in UF Systems ≠ Fouling? Bangmo Technology Explains Scientific O&M: Accurately Distinguish Pressure Trends, Standardize Procedures for Long-Term Performance

2026-10-14

In the daily operation of ultrafiltration (UF) systems, rising transMembrane Pressure (TMP) is one of the most closely watched phenomena for O&M personnel. However, based on extensive on-site service experience, Bangmo Technology's technical team points out: a TMP rise does not necessarily equal membrane fouling. Treating every pressure change as fouling may instead lead to over-cleaning and accelerated membrane element wear.

Normal Pressure Fluctuations: Stabilization During Initial Operation of New Membranes

During the initial operation of new membranes, a slight TMP increase that gradually stabilizes is a normal operating condition. This pressure change primarily stems from the initial adaptation process between the membrane material and the feed water. At this stage, standard hydraulic backwashing can effectively restore TMP levels without the need for chemical cleaning. Misjudging this normal phenomenon as fouling and cleaning frequently not only increases O&M costs but may also shorten membrane service life.

Abnormal Fouling Signals: Two Key Indicators

Bangmo Technology points out that determining whether a TMP rise indicates abnormal fouling should focus on two key indicators: when permeate flow drops by more than 10%, or when TMP increases by 0.1 MPa, and the pressure cannot recover after backwashing maintenance, it is an abnormal fouling signal. This indicates that stubborn foulants have formed on the membrane surface and cannot be effectively removed by routine hydraulic backwashing alone.

Response Procedure: Verify First, Then Clean, Apply Targeted Treatment

When facing abnormal fouling signals, Bangmo Technology recommends the following response procedure: prioritize verifying feed water quality and operating parameters, accurately determine the fouling type, and then formulate the corresponding cleaning plan. Different fouling types — such as organic fouling, biological fouling, and inorganic scaling — require different chemical cleaning agents. Blind cleaning is not only ineffective but may also cause irreversible damage to the membrane. Through targeted backwashing or chemical cleaning, system operation can be restored.

Key to Daily O&M: Record Trends, Standardize Procedures

Bangmo Technology emphasizes that scientifically distinguishing TMP change trends and maintaining proper daily operation records are the foundation of standardized Uf System O&M. By tracking long-term changes in TMP, permeate flow, and water quality data, abnormal signals can be identified early, avoiding missed optimal cleaning windows. Standardized O&M procedures can effectively reduce membrane element wear and ensure long-term stable operation of UF systems.

Bangmo Technology: Safeguarding the Full System Lifecycle with Professional Selection and O&M Support

With over 30 years of expertise in Uf Membrane R&D and manufacturing, Bangmo Technology offers both pressurized and submerged UF membrane element series. Our technical team provides full-process technical support — from membrane selection and pretreatment configuration to cleaning and maintenance — helping customers scientifically manage TMP, extend membrane element service life, and achieve long-term, low-cost system operation.

About Zhuhai Bangmo Technology Co., Ltd.

Zhuhai Bangmo Technology Co., Ltd. is a National High-Tech Enterprise integrating R&D, production, sales, and technical services, with membrane separation technology at its core. With over 30 years of experience in hollow fiber membrane R&D and manufacturing, the company's main products include pressurized hollow fiber UF membrane modules, submerged MBR membrane modules, and submerged ultrafiltration (MCR) membrane modules. These products are widely used in municipal water supply, industrial wastewater reuse, industrial pure water/ultrapure water production, food and beverage filtration, and seawater desalination pretreatment.